FREE SHIPPING on all orders!
You know what they say: an ounce of prevention is worth a pound of cure. Anyone who has experienced a water leak in their home knows this to be true. What is less well known is how to go about protecting your home from a water leak. In today’s blog, we go over some smart practices for avoiding a leak and some great Z-Wave devices that can help if a broken pipe or appliance is unavoidable.
Habitual maintenance is, unfortunately, a requirement for owning a home. If you ignore your appliances for years and years, you’re practically asking for one of them to break and start spewing water. Here are some things you should do every so often to keep your appliances in top shape:
If your gutters become clogged, the overflowing water could damage your roof or foundation and could even seep into the basement. Check the gutters regularly, and don’t wait until they’re overflowing to clean them out.
HVAC units are a frequent source of water leaks, especially if the drain pan is left unattended for a long period of time. It can become clogged, leading to a leak. Have your HVAC unit regularly inspected by a professional to avoid this.
A washing machine hose is often one of the first things to break, and if it does, it can pump out a huge amount of water before you realize. Swap from a rubber hose to a steel one and consider replacing every five years.
For this step, you have two options: you can either make it a point to manually check every water source and appliance in your home on a regular basis, or you can take the smart approach: install Z-Wave water leak sensors. We’ll cover the advantages of the device below, but first, let’s list out some of the biggest problem areas for leaks and floods:
If your home is prone to roof leaks or foundation cracks, those are also prime candidates for water leak monitoring.
Three of the most practical types of Z-Wave devices out there are geared for water leak prevention. Here are three devices you should definitely consider adding to you home as a preventative measure against water damage:
These small devices run on long-lasting batteries, are waterproof, and can detect a leak from just a few drops of water. Connect them to a smart home hub like SmartThings or Wink, and then place the sensors in the spots that are most likely to get hit by water: underneath the refrigerator, behind the washing machine, under the bathroom sink, and so on. You’ll know instantly if a leak happens, even if you’re not home at the time.
So what happens if you get a notification from the leak sensor that there’s a leaky pipe or broken washing machine? If you’re home, you’ll probably rush to your water main and turn it off while you try to fix the issue. If you’re not home, you’re out of luck… unless you have a smart device that attaches to the water main and shuts it off for you. That’s exactly what this Z-Wave shut-off valve does. At the first sign of a leak, it turns off the water to keep damage at a minimum.
If you live in an apartment or don’t have access to a water main, an alarm siren is a great device to complement the leak sensors. After all, you might not have your phone right next to you if you’re relaxing at home. Once the leak is detected, the siren will start an alarm, notifying you that there’s an issue.
In short: the best way to prevent water leaks is with Z-Wave! To get these smart devices, visit our online shop. You can also learn about other creative ways to use Z-Wave technology by reading our other blog posts.